Antenna Distribution System Acemic AD-900
WISHLIST
Antenna Distribution System for Wireless Microphone
Features
The antenna distributor has a high signal-to-noise ratio and anti-interference distribution and transmission architecture.
This system adopts precision circuit design, has low noise and low intermodulation distortion characteristics, and can eliminate mixing.
interference when multiple channels are used at the same time.
Support frequency band UHF 600-928MHz.
Each unit of the antenna distribution system can use the same two antennas for 4 wireless series receivers at the same time, and the
cascade port can connect a fifth wireless series receiver.
It has the characteristics of simplifying the antenna assembly project, improving the system working efficiency, and is convenient for
portability and installation.
With real-time display of input voltage, the stability of the input voltage can be clearly displayed in real-time.
The antennas can adjust the gain value and compensate for cable loss based on the calculation of the cable length and each cable type.
Most cost-effective set. Can be used for convenient and fast expansion of multiple systems, and can be used as a main distributor.
Super stable quality, fully compatible with all brands of wireless microphones.
The antenna distributor has a high signal-to-noise ratio and anti-interference distribution and transmission architecture.
This system adopts precision circuit design, has low noise and low intermodulation distortion characteristics, and can eliminate mixing.
interference when multiple channels are used at the same time.
Support frequency band UHF 600-928MHz.
Each unit of the antenna distribution system can use the same two antennas for 4 wireless series receivers at the same time, and the
cascade port can connect a fifth wireless series receiver.
It has the characteristics of simplifying the antenna assembly project, improving the system working efficiency, and is convenient for
portability and installation.
With real-time display of input voltage, the stability of the input voltage can be clearly displayed in real-time.
The antennas can adjust the gain value and compensate for cable loss based on the calculation of the cable length and each cable type.
Most cost-effective set. Can be used for convenient and fast expansion of multiple systems, and can be used as a main distributor.
Super stable quality, fully compatible with all brands of wireless microphones.
Quantity
Detail
Customer Reviews
Model: AD-900
10 Groups of Channel
10 Groups of Channel
Antenna Specifications
Frequency band: UHF 660-690MHz (USA: 902-928MHz)
Directionality: Cardioid
Polarization method: linear
Gain: -16~16db (manually each 1dB)
Standing wave ratio:<2
Amplifier low noise:<0.6dB
Amplifier OIP3:>38dBm
External power supply: 6-12DCV
Current: 150mA
Connector port: BNC
Host Technical Specifications
Frequency band: UHF 660-690MHz (USA: 902-928MHz)
Total gain: 0dB, ± 1dB
Separation degree:>25dB
Input/output impedance: 50 ohms
Connector port: BNC
Antenna power supply:+12V DC/200mA, with the central point being the positive pole
DC output: 12V DC/1A (MAX) * 4 groups with central point as positive pole
Power supply: 100-240V AC, 50/60Hz 36W (DC-OUT-12V MAX: 3A)