Flute Microphone Acemic Q2/DT-5

Model: Q2/DT-5
Operating Range: 50m, 164ft

Specifications
Receiver
Frequency Range: UHF 660-690MHz (USA: 902-928MHz)
Channels:Pre-set 20 frequencies
Demodulation mode:Pi/4 DQPSK
Transmission delay：<6ms
Sampling Rate:48KHz
Frequency response: 60Hz-15KHz
Distortion:<0.8%(1KHz)
Signal / Noise Ratio:>92dB
Receive Sensitivity:-92dBm
Output interface:3.5 mm TRS
Power supply:3.7V lithium battery
Continuous using time: 5 hours

Transmitter
Frequency range: UHF 660-690MHz (USA: 902-928MHz)
Modulation mode: pi/4 DQPSK
Transmitter power: 10mW
Sensitivity: -47 db±2dB
Frequency change: IR synch 
Microphone type: Condenser
Microphone dimension: Φ14*5.0mm   
Power supply: 3.7V lithium battery
Power consumption:>6 hours continuously using
Dimension: 125*40*20mm 

About this item
【For Two Flutes】Q2/DT-5 is a dual UHF instrument wireless microphone for two flutes. The package includes 2 Transmitters and 1 Receiver—two transmitters can be connected to one receiver simultaneously by two flutes, or can be used interchangeably when one performer is playing for extended periods. This allows for interchanging use during extended performance periods.
【UHF Stable Transmission】The wireless flute microphone utilizes UHF frequency and advanced digital audio transmission technology, featuring infrared automatic pairing, a 48kHz sampling rate, and an ultra-short audio delay. This ensures sound transmission with recording-quality clarity. The system offers stable transmission up to 40 meters (132ft) in open areas. (Note: Please ensure the antenna on the bottom of the receiver is installed before formal use.)
20 Preset Channels】This flute microphone wireless system offers 20 adjustable preset channels to minimize potential interference and supports up to 4 systems for simultaneous use on the same occasion. To pair the systems: Short press the channel switching button of the transmitter, and the corresponding channel indicator flashes. This indicates that the channel has been automatically switched.
【Wide Application】This flute microphone is highly suitable for a variety of woodwind instruments, including flutes, hulusi (Chinese reed pipes), piccolos, bamboo flutes, clarinets, harmonicas, and others. The package includes a 6.35mm to 3.5mm adapter for use with various portable PA systems, speakers, amplifiers, and audio mixers. It also comes with a carrying bag, making it convenient to carry wherever you perform.
【6 Hours Continuous Use Time】This flute microphone wireless system, which includes 2 transmitters and 1 receiver, each with a built-in rechargeable battery,offers 6 hours of continuous use on a single charge after a 2.5 to 3 hours charging time. Included in the package is a 2-in-1 charging cable for charging both the transmitter and receiver simultaneously. Ideal for gigs, weddings, church services, teaching, band performances, pub performances, solo musician performances, and small concerts.