Home
/
Wireless Flute Microphone Acemic DT-5
Wireless Flute Microphone Acemic DT-5
WISHLIST
Wireless Flute Microphone System
Features
UHF 600-928MHz frequency range
Digital wireless audio transmission
48KHz audio sampling mode
Pre-set 16 selectable frequencies
Digital ID code, completely solves frequency interference
IR sync downloading the frequency from receiver
Lithium battery power supply
Portable plug-on receiver, plug in the mixer or active speaker directly
Up to 164 feet (50m) line-of-sight operating range
Suitable for flute playing, stage performance
UHF 600-928MHz frequency range
Digital wireless audio transmission
48KHz audio sampling mode
Pre-set 16 selectable frequencies
Digital ID code, completely solves frequency interference
IR sync downloading the frequency from receiver
Lithium battery power supply
Portable plug-on receiver, plug in the mixer or active speaker directly
Up to 164 feet (50m) line-of-sight operating range
Suitable for flute playing, stage performance
Quantity
Detail
Customer Reviews
Model: DT-5
Operating Range: 50m, 164ft
Specifications
Operating Range: 50m, 164ft
Specifications
Receiver
Frequency range: UHF 660-690MHz (USA: 902-928MHz)
Frequency: Pre-set 16 selectable channels
Modulation mode: pi/4 DQPSK
Latency: <6ms
Sampling: 48KHz
Frequency response: 60Hz - 15KHz ± 2dB
Total Harmonic Distortion: <0.8%(1KHz)
Signal/noise ratio: >92dB
Receiving sensitivity: -92dBm
Output: 6.35mm plug
Power supply: 3.7V Lithium battery
Power consumption: >6 hours continuously using
Dimensions: 185*20*10mm
Transmitter
Frequency range: UHF 660-690MHz (USA: 902-928MHz)
Modulation mode: pi/4 DQPSK
Transmitter power: 10mW
Sensitivity: -47 db±2dB
Frequency change: IR synch
Microphone type: Condenser
Microphone dimension: Φ4.0*1.5mm
Power supply: 3.7V lithium battery
Power consumption:>6 hours continuously using
Dimension: 145*40*27mm
About this item:
【High quality sound】The wireless flute microphone features condenser microphone core, so that the sound reproduction of the instrument can reach 99%.
【Stable signal transmission】The wireless flute microphone system signal transmission distance is 164ft (50m). A total of 16 UHF channels can be selected, and 4 sets of microphone systems can be used at the same time without signal interference.
【Easy to use】The wireless flute microphone use the Velcro strap to fix the transmitter on the flute, plug the receiver into the MIC interface of the speaker, and then turn it on and use it.
【High-capacity lithium battery】The wireless flute microphone system adopts 2-in-1 charging cable to charge the receiver and transmitter at the same time, greatly reducing the charging time.The transmitter and receiver has built-in 750mAh battery, which can be recharged 2000 times, and can be used for 6 hours after 2 hours of charging.
【Widely Used】This wireless flute microphone can be used in solo performance, accompaniment performance, personal entertainment, group performance. 1/4 inch plug (and give a 1/4 inch（6.35mm） to 1/8 inch（3.5mm） conversion plug) can be used to a variety of equipment, loudspeakers, computer audio, PA speakers, mixers, and so on.
